I believe the Davis drivers are outdated and seems they don't maintain currency with the updates. The drivers that Davis packaged with the software did not work with my late model Intel Mac. (Aside: I mainly use the SX3K for the weather station and it works well for that, but some experimentation in applying it to Elgato's eyeTV HD (connected to the set-top box in living room) for putting video signals on my network and picking up the connection to my computer located in another room, failed because it did not have enough power to achieve USB 2 speeds.)Īlso, I forgot to mention previously, for anyone who has the Davis Weatherlink software for Mac, it's important that you download and install the CP210x USB to UART Bridge VCP Driver directly from (Silicon Labs). If there's a local, you can find the unit there for about $90 US. I picked the SX3000GB after looking and comparing specifications of similar products and took a chance that it would work for my needs in the weather station. Now you should be able to connect to the remote station, download data, view real-time weather conditions, etc. (If you don't see the Port specified, reboot your machine and try again after launching the SX Virtual Link.) Close the error dialogs and select from the menu: Setup\Communications Config\ Launch WeatherLink.first time get an error that cannot connect. Connect to the weather station with the SX Virtual Link (can also specify which application to launch automatically when it connects) IMPORTANT: set to run in 32 bit mode (use Get Info) Install Davis WeatherLink 5.1.0 SW for the VPro2 weather station console. Install and setup SX Virtual Link 3.4.0 (SXUPTP driver 1.5.1) software that comes with the SX-3000GB Mac OS X (10.6.5) networking through AirPort Silex Technology Inc SX-3000GB USB Device Server (used to input the VPro2 USB and connect to ethernet network as part of the AirPort Extreme wireless/router) Weather Station: Davis Vantage Pro 2 with USB datalogger Press "Start" to reactivate the Agent and resume polling of your weather staion for data.It may be helpful to share my remote weather station setup: Select 1 minute or 30 seconds interval if you want more frequent publishing, but be aware that it will create more FTP bandwidth usage. Select the interval to use for the uploads - 5 minutes is usually fine to show the weather conditions on your website. Use the return key to make sure the settings are locked in the text boxes.Ĭheck the "Push my weather data via FTP" checkbox to enable the upload of the weather.json file. If the Agent is running, press the 'Stop' button to stop the Agent and allow the configuration.Įnter your FTP username, password and server information in the areas shown in the screen shot. WeatherSnoop setupĬonfigure WeatherSnoop for internet uploads by going to the WeatherSnoop, View, Agent, Sharing, FTP panel NOTE: WeatherSnoop Version 2.1.1 (or greater version number) is requred for use with the template set. Please follow the setup instructions in the section below to have WeatherSnoop upload the weather.json file. There is only one setup required in WeatherSnoop for the proper operation of your template set. PHP/AJAX Website Template Set - WeatherSnoop Setup Overview Thanks for your kind support!Ī Version History is available - check back from time to time to see if there are updates to scripts you have downloaded earlier.Īnnouncements of version updates and new scripts are made onĪnd saratogaWXPHP Twitter account as they become available. If you find one or more of the scripts useful to you, please consider making a donation to help offset the routine expenses of operation of this website. Many of these scripts are now available on GitHub at You will need to configure them for your own particular weather station website.Ī RSS Feed is available to help keep you informed on updates to the scripts. I accept no liability for any damages that may ensue from their use. Please note that you use these scripts at your own risk. The scripts referenced here are used in the operation of this weather station, and may be freely copied and used to support your station. PHP for thermometer graphic (WD/VWS/Cumulus). Envt.Canada Lighting Danger (English/French).NOAA ATOM/CAP multifeed processor (PHP5).Wunderground forecast with icons - multilingual.VisualCrossing Forecast with icons - multilingual.Pirateweather Forecast with icons - multilingual.OpenWeatherMap Forecast with icons - multilingual.Aerisweather Forecast with icons - multilingual.WXSIM Forecast with icons RSS 2.0 feed multi-lingual.WXSIM Forecast with icons - multi-lingual.Canada Forecast/Advisory (English/French)
0 Comments
Leave a Reply. |